Saskatchewan Commercial Pool Hand Rails

Blue box
Horizontal Paradise Leisurescapes Commercial Logo
Handrails & Stair Rails
Grab Rails
Figure 4 
The most popular model. For flat deck without unusual curbs or coping. Available in .145" wall, .104" wall, and .065" grades.



Adjustable Figure 4 
Front leg is adjustable in field so it can be set atop curbs or into gutters. For unusual conditions that don't allow figure 4 style. Available in .145" wall, .104" wall, and .065" grades. Also available in a long reach size to fit extra-wide gutters. This long reach rail is custom fabricated to pool profile.
Welded Figure 4 
If you furnish specific deck and gutter dimentions we can supply our adjustable grab rail styleing as a fixed fully-welded unit. Available in .145" wall, .104" wall, and .065" grades. 


California 
​Made extra-wide to clear wide gutters or when deck-to-water distance is exceptionally great. Legs offset laterally to minimize deck width requirements. Front end dips downward for a shorter reach for low water level pools. Available in .145" wall, .104" wall, and .065" grades.  
Pretezel Bend 
Requires the least amount of deck width with the narrowest profile as the legs are offset laterally instead of front to back. Can usually be mounted on pool wall rather than the deck slab. Available in .145" wall, .104" wall, and .065" grades. 
Artisan Series Hand Rail is a patented, designer inspired rail. The Artisan Series Hand Rail easily retrofits into an existing Figure 4 setting. 
 
Tubing: 1.90" OD,
Wall Thickness: .065"
Type: 304 or 316L stainless steel.
The Meridian Series Hand Rail is a patent-pending, designer inspired rail.  The Meridian Series Hand Rail easily retrofits into an existing Figure 4 setting. 
 
Tubing: 1.90" OD,
Wall Thickness: .065"
Type: 304 or 316L stainless steel.
Deck Mounted Stair Rails
Deck mounted rails are intended for use with vinyl or fiberglass pools having premolded steps. Anchorage of the rails to the deck is 8" on centre and provides the stability needed without penetrating the molded steps. A variety of models are available to meet any pool or spa configuration.
All rails are .065" wall thickness. 
Horizontal Deck Rail
Horizontal Flat Top Deck Rail
Sloping Deck Rail
Sloping Welded Deck Rail
Artisan Deck Rail
Meridian Deck Rail
Deck Mounted Hand Rail
Stair Rails
Stair Rails should be used on all pool entry steps as a necessary safety feature to allow 
safe entry and exit from the pool. T304 stainless steel polished and buffed to a 320 
grit finish. Can be installed directly in concrete or in optional anchor sockets.
Three Bend Rail 
Avaiable in 48" wide, 60" wide, 72" wide
Two Bend Rail 
Avaiable in 48" wide, 60" wide, 72" wide
Meridian Stair Rail 
Artisan Stair Rail